4" x 2" Mold-On Rubber Cast Swivel Caster w/ Total Lock Brake - 400 lbs. Cap. Oval Lab & Disposal Cans Overall Height 10-1/8" Bearing Type

Overall Height 10-1/8" Bearing Type Roller Bearing Plate Size 4-1/2" x 6-1/4" Tread Type Phenolic Resin With Macerated Canvas Core Type Phenolic Resin With Macerated Canvas Swivel Radius 6-1/4" Bolt Hole Pattern 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4" Bolt Hole Diameter 1/2" Durometer Shore D 90 (+/-5)

Wheel Diameter 10" Tread Width 1-1/2" Tread Type Rubber

These 3/4 in open clips for steel banding are snap-on seals placed on overlapping strap ends after tensioning

SKU Configuration Details 45DV60JT0417YY Four-Position Swivel Lock: Standard 45DV60JT0417PY Four-Position Swivel Lock: Add 4-Position Swivel Lock

adapters Application PMV 5:1 and 6:1 Pre-Set Relief Pressure 900 psi/62 bar Size NPT Integrated

4" x 2" Mold-On Rubber Cast Swivel Caster w/ Total Lock Brake - 400 lbs. Cap. Oval Lab & Disposal Cans Overall Height 10-1/8" Bearing TypeProduct Overview The mold on rubber cast wheel is an economic wheel, providing a cushion while rolling on a strong cast iron core. This wheel performs best in dry applications. Tread: Rubber Vulcanized To Core This caster is listed with wheel diameter 4", tread width 2", load capacity 400 Lbs., tread type Rubber Vulcanized To Core, and bearing type Roller Bearing. Before ordering, verify the listed wheel dimensions, load capacity, bore or bearing, hub