RatRig Pillow Blocks - Machined Hotend Mounts We have provided this link

We have provided this link for some hinges that were already designed for the RatRig with 6mm panels

and modify the STEP file from the Fusion archive to include cutouts for my filament spool holder and filament feed line on the right side of the printer

2mm or flatter

The depth of the magnet pockets can vary a tiny bit due to variances in the thickness of the magnets and the flatness of the sheet

Keenovo carries these on their store

RatRig Pillow Blocks - Machined Hotend Mounts We have provided this linkThe RatRig Pillow Blocks have been machined from 6061 to match the currently printed pillow blocks. They are a snug, but not too tight fit for the provided RatRig thrust bearings. They work on VCore 3. 1 and 4. 0. For VCore 4. 0, you will need to provide 12 m3x14 bolts.