071: HS-050-LV (Shipment 15th of August 2026) 59mm x 87mm x 13mm

59mm x 87mm x 13mm / 72g with enclosure(without cables)

The board comes with a 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC

34mm x 38mm x 10mm / 16g with CFK enclosure

This allows the cable length can be adjusted before installation

200A – Current measurement sensor board

071: HS-050-LV (Shipment 15th of August 2026) 59mm x 87mm x 13mm50A Current measurement sensor board, based on Allegro Hall Sensor ACS 50U. The voltage reading of the LiPo is optimized for up to 6S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. The board